eSUN PLA Basic, black · 1.75 mm · 1 kg
A single black spool for the material-cost worksheet. Match the diameter and printer profile before ordering.
Filament WorkbenchWORKBENCH / YIELD RISK
Start with a fixed number of parts promised. This worksheet shows how many attempts the quote can pay for.
The quote can cover up to 24 attempts after fixed costs and reserved margin.
AFTER THE NUMBER / THE ASSUMPTIONS
For 20 good parts at 5 per attempt, a quote of 180 leaves 120 after 42 in fixed costs and 18 in reserved margin. That buys 24 whole attempts. A fifth rejected unit would use part of the margin. With zero rejections you still need the first 20 attempts.
A late failure can take a nearly full share of filament and printer time. If you expect cheap early failures, begin with the full-attempt cost and revise that assumption from actual batch records. For a shared plate, decide whether to model an entire plate as one attempt: a bed adhesion issue can lose several parts together.
Use the batch cost calculator to estimate material and machine cost before transferring the values here. Avoid counting setup or overhead twice. Neither worksheet predicts failure rates or delivery dates.
Change the tool inputs to see relevant references. Compatibility remains a separate check.
As an Amazon Associate I earn from qualifying purchases. These are optional references, not product tests or live offers.
A single black spool for the material-cost worksheet. Match the diameter and printer profile before ordering.
A single PETG spool. Check the printer, build surface and material instructions separately from the cost comparison.
A flexible-material spool. Check the exact extruder and feed-system guidance before choosing TPU.
A 0–6 inch / 0–150 mm caliper for recording part dimensions. Check zero and your measuring technique; this entry does not promise the separate W/SLC certification package.
A precision flush cutter for small trimming jobs. Keep it within the manufacturer’s cutting limits; do not use it as a general-purpose hardened-wire cutter.
A single-spool drying and storage format. Check spool dimensions, power supply and the filament maker’s drying instructions; a dryer preset is not a material qualification.
A four-spool drying format for several reels. Check spool clearance and whether the loaded materials need different drying conditions.
Compare print costs · Plan plate capacity · Cost per good print