Skip to content

What's on
the workbench?

Start with the full sliced footprint. Then put a cost beside the result.

FDM print head depositing material on the build surface
Start with the part and the process. Use your own slicer estimates in the tools below. HRostamani · CC BY-SA 4.0

Make a better plan
before the first layer.

Check the material, fit the plate, and compare the cost of usable parts. Then keep a record you can improve after the run.

Explore eight material families · Read the guides
01 / PLATE CAPACITYFull layout tool ↗

Quick plan retains 10 mm at each edge and 5 mm between parts. The full tool lets you change these.

Enter the job dimensions to begin.

Related equipment and reading

Change the tool inputs to see relevant references. Compatibility remains a separate check.

As an Amazon Associate I earn from qualifying purchases. These are optional references, not product tests or live offers.

Compare print costs · Plan plate capacity · Cost per good print

02 / INSPECT

Look inside the geometry.

Original enclosure. Assembled and exploded views. Wall, vent and fastener questions before slicing.

Open the study ↗
03 / ESTIMATE

Put the cost beside the part.

Compare material, machine time, handling and failed attempts for the same good quantity.

Compare two scenarios ↗
04 / CHECK

Know what the quote can absorb.

Find where extra rejects consume the reserve you intended to keep.

Check the reserve ↗

WORKED EXAMPLE / EDITABLE ASSUMPTIONS

Twelve parts.
Two ways to make them.

A shorter print is not automatically a cheaper batch. Scenario A uses less handling time; scenario B uses a different material and failure allowance. Compare both with your own slicer estimates.

Open the two-scenario calculator ↗
GOOD PARTS REQUIRED
12
COMPARE
Material + time + handling
CHECK BEFORE QUOTING
Failure allowance + usable yield

THE JOB RECORD / GUIDES & CASE NOTES

Keep the working.

01 / COSTINGThe real cost of a printMethod + example
02 / MATERIALPlan the spool before a long runMeasurements + uncertainty
03 / PRODUCTIONPlan a repeatable batchPlate count + yield
04 / CASE NOTE25 good parts, three runsWorked, untested assumptions

Explore all guides and articles

THE FIELD DIRECTORY / PLAN THE NEXT JOB

More than a number.

Compare materials, investigate a printer or provider, and follow a model back to its source.

From spool to finished part.

Photography: sources and licences.

Filament Workbench

A note from the workbench.

Receive email notes and new content from Filament Workbench.

Newsletter signup

Signup is available after this page finishes loading.

Privacy

Filament Workbench

Your privacy choices

With your permission, we use Google Analytics to understand page visits. Google Analytics stays unloaded without consent. Articles, calculators and 3D views work with either choice.

Optional analytics only

Advertising and personalisation stay off. We send the canonical page address without query strings or fragments, and no calculator entries. Your choice applies only to this site for up to 180 days.

Change your choice here anytime. Withdrawing consent reloads the page to unload Google code; save any open tool inputs first. Privacy and storage details